Manual Paediatric Wheelchairs

View Our Range Of Manual Paediatric Wheelchairs Below

TiLite Pilot

Ready For Take Off.

Watch your kid soar in the ultra-lightweight TiLite Pilot paediatric wheelchair. Finally, a chair that moves and grows with your child.

Ready to grow

The TiLite Pilot has built-in forward growth adjustment to grow with your child and maintain optimal rear wheel access. This gives kids the most efficient propulsion possible without needing to adjust or relearn their push mechanics. The TiLite Pilot lets kids cruise their world like never before.

Designed to move

The clean frame design features a seat pan and side panels that provide easy access to the adjustment bolts, making changes simple and intuitive. Unlike on other chairs, all of these adjustments can be done without compromising access to the rear wheels.

Cleared for landing

The ultra-lightweight design and carbon fiber frame panels make it 50% lighter and a breeze for kids to navigate all the adventures of their great big world. Quick release wheels and transit tie downs mean that bringing the Pilot everywhere is also simple for mum and dad.

Sized from 8″ x 9″ up to 14″ x 15″.

2″ of growth in seat width.

3″ of growth in seat depth.

The innovative carbon fiber frame design makes for light weight and easy adjustments.

Lever-actuated wheel locks put the fun in functional!

Mounted in the upper position, the wheel lock lever is easy to reach.

Mounted in the lower position, the levers are out of the way for fast pushes.

Unique footrest adjustment makes dialing in the perfect position easy.

 As small as 3 inches of Seat to Footrest height without additional high mount parts.

Takes pressure off the clinician to choose a front frame angle.

Available with standard angle adjustable and flip-back footplates.

TWIST

Child prodigy.

Designed from the ground up for kiddos, the TWIST paediatric wheelchair encourages exploration, independence, and, yes, playfulness. There are no parts or growth kits to buy. Instead, the TWIST grows with you.

Growable

Other chairs say they grow, but new parts or growth kits are required. With the TWIST, growth is built in. Sized from 8″ x 8″ up to 15″ x 16″, the TWIST offers 2″ of growth in seat width and 3″ of growth in seat depth.

Full Adjustability

The Tru-Fit system opens up the world of adjustability by incorporating an infinite adjustment mechanism. The Tru-Fit system allows you to fine tune the fit of your wheelchair because you are not limited to a series of pre-set holes.

Parent Friendly

If your child is tired, a hill looms ahead, or you just feel like lending a hand, welcome to the TWIST Center-Mounted Push Handle option. Height-adjustable, and easily removable, the handle is there when you want it and not when you don’t.

No growth kits required! The TWIST is ready to grow straight out of the box.

Sized from 8″ x 8″ up to 15″ x 16″.

2″ of growth in seat width.

3″ of growth in seat depth.

The 1″ aluminum frame design makes for easy installation of seating components.

Center Mount Anti-Tip with Single Swivel Caster allows for skills acquisition without compromising safety.

High-Mount Footplate System

Maximizes Seat To Footrest Height (STFH)

As small as 6 inches of STFH

No need for risers

No clamp on systems

Keeps a clean look to the TWIST often lost with other pediatric chairs

The Tru-Fit System opens up the world of adjustability by incorporating an infinite adjustment mechanism. The Tru-Fit system allows you to fine tune the fit of your chair because you are not limited to a series of pre-set holes. Also, instead of bolting through frame-weakening holes, components clamp directly onto the frame. This eliminates one of the main stress points on today’s wheelchairs by reducing the number of holes in the frame.

Adjustable Camber Mount incorporates TiLite’s Tru-Fit system with up to 3.5″ of rear seat height adjustment.

Patented Speedloader Adjustable Front Caster Housing quickly and accurately adjusts fork angle in 1° increments.

Zero Play Camber Plugs give a much tighter feel to the chair like sport suspension in a car. CNC machined from billet aluminum to the highest tolerances, they remove any side to side movement from the rear wheels.

TiShaft Back Release Bar makes folding and unfolding the backrest easy from any angle.

 

Simba

The lightest rigid paediatric wheelchair for children with growth adjustability.

The ZIPPIE Simba is the perfect lightweight rigid paediatric wheelchair, with an overall product weight from only 8kg – that’s 1.5kg lighter than other similar models!. So your child will find it easier to push and manoeuvre themselves  – enabling them to be active for longer. Plus, with lots of exciting options, a wide choice of colours and a seat that grows with the child, this is the ideal manual wheelchair for active kids.

It’s all about ergonomics.

Push Bar

The push bar can be easily adjusted in angle and height for an enhanced ergonomic position. The new stabilizer reinforces the wheelchair’s backrest, especially when push handles are chosen.

Stop your Simba quicker!

Safari wheel lock

With its improved handling, the updated safari side guard wheel lock enables you to stop your Simba wheelchair quickly and safely. 

Tougher and lighter than ever before.

Innovative design

The outstanding design of the new castor link tube, combined with the innovative carbotecture forks that are
made from extremely lightweight stiff high-tech material, makes the Simba wheelchair just that little bit lighter.

Adjustable to your needs.

Fully-adjustable axle adapter

The optimised axle adapter offers full adjustability of the rear seat height, centre of gravity and camber without compromising on any performace.

Dimensions:

Width:670mm (depending on configuration) – (67cm depending on configuration)

Length:890mm (89cm)

Seat Width:220mm – 360mm ( +/- 20mm growth) – (22cm – 36cm) ( +/- 2cm growth)

Seat Depth:240mm – 380mm ( +/- 40mm growth) – (24cm – 38cm) ( +/- 4cm growth)

Front seat height:360mm – 480mm (36cm – 48cm)

Rear seat height:290mm – 460mm (29cm – 46cm)

specs.tiltinspace:n/a

Backrest Height:200mm – 400mm (20cm – 40cm)

Backrest Angle:-16° – + 20°

Lower leg length:170mm – 360mm (17cm – 36cm)

Additional Growth (Depth):ability of growth with new parts

Additional Growth (Depth):ability of growth with new parts

Frame Angle:90°

 

Performance/Weights:

Frame Type:Rigid

Frame Version:0 / 3 cm abduction

Maximum User Weight:65 kg (10.3 stone)

Total Weight:from 8 kg

 

Youngster 3 Folding Wheelchair

The lightest folding wheelchair for children with growth adjustability.

The ZIPPIE Youngster 3 paediatric wheelchair is not only ultra lightweight, but also provides seat width and depth growth of +2 cm and +4 cm without any additional parts. Designed for the unique needs of active kids, the Youngster 3 provides excellent manoeuvrability, good front stability and an exceptionally unique look.

Patented cross-brace

The cross-brace of the Youngster 3 paediatric wheelchair provides seat width growth by 2cm without the need for additional parts, so when your child grows – so does their lightweight folding wheelchair. 

Seat depth growth

The seat depth also has growth of 4cm, via seat tubes (without new parts).

 Safari Brake

The safari-brake in the skirtguard panel is carefully integrated for quick and easy braking without your child leaning forward. 

Lightweight castor fork

Minimum weight and maximum adjustment, the lightweight fork also has improved looks and better manoeuvrability.

Dimensions

Width:645mm (depending on configuration) – (64.5cm depending on configuration)

Length:800mm (80cm)

Seat Width:220mm – 400mm (+/-20mm growth) – (22cm – 40cm) (+/-2cm growth)

Seat Depth:240mm – 400mm (+/-40mm growth) – (24cm – 40cm) (+/-4cm growth)

Front seat height:370mm – 500mm (37cm – 50cm)

Rear seat height:320mm – 470mm (32cm – 47cm)

specs.tiltinspace:n/a

Backrest Height:250mm – 400mm (+/-25mm) – (25cm – 40cm) (+/-2.5cm)

Backrest Angle:90° / optional angle adj 87° – 105°

Lower leg length:110mm – 470mm (11cm – 47cm)

Additional Growth (Depth):ability of growth with new parts

Additional Growth (Depth):ability of growth with new parts

Frame Angle:75°

 

Performance/Weights

Frame Type:Folding

Frame Version:Standard and abduction

Maximum User Weight:85 kg (13.39 stone)

Total Weight:from 8.5 kg

ACTION 3 JUNIOR

Versatility, adaptability and personality! Developing alongside the child with specific seating adjustment and accommodating individual needs through great innovation, the NEW Action 3 Junior paediatric wheelchair truly stands out in the lightweight paediatric wheelchair range. Together with Invacare’s fresh personalisation 

Coming soon contact us for more details

F.A.Q.

Powerchair batteries should be charged after every use for no less than 8 hours, in most situations clients use the chair throughout the day, put it on charge in the evening and the take it off charge the next morning. It is important to note that if the chair is not used for a particular length of time that the chair still needs to be charged, if possible select a day during the week and put the chair on an overnight charge every week it’s not in use. 

There are too many variables such as chair type, battery size, powered seat functions in use, charge process, terrain etc to give any exact information however there are certain manufacturers that build in software for you to connect to and receive up-to date information on battery life.

The high risk nature of a cushion is indeed relating to pressure relief but not necessarily because of any historical issues. The support provided by this level of cushion offers structural positioning as well as pressure relief for anyone sitting for a considerable length of time. Meaning that regardless of your situation, if you’re spending a lot of time in your chair then it is very important that you invest in a suitable cushion to support you for the duration. 

In terms of manoeuvrability a compact, mid-wheel drive (MWD) chair is definitely the superior option. Due to the main wheels being centred directly under the seat it allows the chair to turn around that axis, the wheels turn in opposite directions to each other similar to a rowing boat or caterpillar tracks when turning which keeps the turning circle extremely tight. In addition to this, unlike a front-wheel drive (FWD) or a rear-wheel drive (RWD) chair there is absolutely no obstruction either behind or in front of you. 

Yes they can, all of the prescriptive paediatric chairs supplied by CMS have the ability to adjust by 2-3” inches in either width or depth. The only thing to bear in mind is the change in seat cushion and potentially backrest height.